Ultrasonic PP hollow board Box Welder

The ultrasonic welding technology of the hollow board turnover box is relatively mature and perfect. Every region usually has the plastic hollow board packaging manufacturing industry. The plastic hollow board ultrasonic welding method is more energy-saving and environmentally friendly than the traditional fixing method, and the shape of ultrasonic welding is more common. There are cross-shaped, plum-shaped, double plum-shaped, plastic hollow board is a very typical application field of ultrasonic welding.

Ultrasonic cross welding sample of hollow board turnover box:

The cross-shaped ultrasonic welding shape is the most used

Ultrasonic plum-shaped welding sample of hollow board turnover box:

The shape of the plum-shaped ultrasonic welding is gradually increasing, the difference is that the ultrasonic tooth shape is different

Ultrasonic double plum blossom welding sample of hollow board turnover box:

Double plum blossoms are rare, and the upper and lower plum blossoms will wear faster to the ultrasonic mold.

The hollow board turnover box ultrasonic welding machine consists of a frame and a standard ultrasonic welding machine, and the size of the frame can be customized according to customer requirements.

The hollow plate turnover box ultrasonic mold is made of aluminum and titanium alloys. Titanium alloys are more wear-resistant and durable than aluminum, and aluminum has better ultrasonic conduction and heat removal than titanium alloys. In the case of using a titanium alloy ultrasonic mold, the surface of the mold will be a little hot after welding for a while, and the curing time can be appropriately increased. Ultrasonic molds will be worn and damaged after a period of welding, and ultrasonic welding heads should be properly prepared.

The frequency of 15K is selected for the ultrasonic plastic welding machine of the hollow board turnover box. The most commonly used one is to weld one point one by one. In order to better improve the work efficiency, some customers use the ultrasonic mold to weld 2 to 4 points at a time. It is not recommended. .