Time: 2026-11-09 10:04:33
Click:
In battery module manufacturing, the welding machine is only one part of the joining process. The fixture that holds the components can be equally important.
When connecting battery conductors, metal tabs or busbars, even small changes in component position can affect the contact area between the parts and the consistency of the welding process.
For production engineers, designing a suitable ultrasonic welding fixture is not simply about holding two metal components together. It involves controlling the component position, supporting the weld area, maintaining a stable force path and ensuring that the finished assembly can be removed without damage.
This article explains the main considerations when designing an ultrasonic welding fixture for battery module interconnections.
The geometry and thickness of these components vary according to the battery design.
During ultrasonic metal welding, high-frequency mechanical vibration is applied under controlled pressure. The components must remain properly positioned throughout the welding cycle.
An unsuitable fixture may lead to several production problems:
Misalignment between components
If the upper component moves during welding, the actual bonding area may differ from the intended welding position.
Insufficient support beneath the joint
The lower component needs stable support. Excessive movement or uneven support can affect the consistency of the weld.
Uncontrolled component deformation
Thin metal parts may experience excessive local deformation if the fixture does not support them appropriately.
Difficult loading and unloading
A fixture that holds the component securely but makes removal difficult can interrupt production and increase the risk of damaging finished connections.
For these reasons, fixture design should be considered during the initial application evaluation rather than after the welding machine has been selected.
The first requirement is repeatable positioning.
The battery tab, connector or busbar should be located according to defined mechanical reference points.
Depending on the component geometry, the fixture may use:
The purpose is to ensure that the intended welding area remains aligned with the sonotrode.
For battery module production, positioning should also account for variations in component dimensions and assembly tolerances.
A fixture should not depend entirely on an operator visually estimating the welding position.
The anvil is the supporting tool beneath the welding area.
Its geometry and contact surface influence how the component is supported during vibration and compression.
When designing the anvil, engineers should evaluate:
For thin metal conductors, the support area should be designed carefully to avoid unwanted bending outside the intended welding region.
The anvil and sonotrode should be evaluated as a working pair rather than as independent components.
The fixture must prevent unwanted movement without damaging the battery components.
Clamping should hold the workpiece in a repeatable position while allowing the ultrasonic welding head to apply the required force to the joint.
Important considerations include:
For pouch cell applications, particular care is required around the cell body and sealing region.
The fixture should support the designated metal connection area without transferring unnecessary mechanical stress to the pouch or its sealing structure.
The welding head must have sufficient access to the intended bonding area.
This becomes more challenging when battery connectors have curved profiles, narrow spaces or multiple adjacent connection points.
The fixture design should consider:
The welding surface must remain accessible without interference from the fixture or surrounding assembly.
A production fixture should be practical for daily operation.
Engineers should evaluate whether the operator can:
For products with multiple connection configurations, interchangeable locating elements may be worth considering.
The final design should balance positioning accuracy, production convenience and maintenance requirements.
Different battery products require different fixture arrangements.
Battery module production may involve connecting multiple cell terminals to conductive plates or busbars.
The fixture must accommodate the actual module geometry, connection position and welding sequence.
Where several welding points are required, the engineering team should consider whether the parts can be positioned consistently at each location.
Large energy storage assemblies may contain different connector geometries and conductor configurations.
The fixture should consider the dimensions of the assembled module, access to the connection points and the required welding direction.
The actual welding configuration must be verified using representative production samples.
Drone battery assemblies often have compact layouts and limited installation space.
Fixture design should account for the dimensions of the battery assembly and the position of the electrical connection.
A compact fixture can help simplify component positioning, but its suitability depends on the actual battery structure.
Before approving a fixture for production, manufacturers should carry out a structured evaluation.
Step 1: Confirm the component drawings
Review material, thickness, dimensions, surface condition and welding location.
Step 2: Check the positioning accuracy
Confirm that the components can be loaded repeatedly in the intended welding position.
Step 3: Evaluate the tool alignment
Check the alignment between the sonotrode, workpiece and anvil.
Step 4: Conduct sample welding trials
Use actual production materials to establish suitable welding conditions.
Step 5: Inspect the finished connections
Evaluate the weld appearance, component deformation, mechanical performance and electrical characteristics according to the product requirements.
Step 6: Verify production operation
Check loading convenience, unloading, fixture stability and the repeatability of the process.
A fixture should only be approved after the welding application has been evaluated with representative materials and production conditions.

There is no universal fixture suitable for every battery welding application.
The correct design depends on the component material, thickness, geometry, required welding area and production arrangement.
Wuxi Qijiang Precision Machinery Co., Ltd. provides ultrasonic metal welding equipment and application-specific welding solutions.
For battery manufacturers, the welding configuration can be evaluated according to the actual workpiece and joining requirements.
When discussing a new fixture, manufacturers are encouraged to provide:
These details help determine the appropriate welding tooling and fixture arrangement.
In battery module manufacturing, a stable ultrasonic welding process starts with more than selecting a suitable generator and welding head.
Accurate positioning, appropriate anvil support, controlled clamping and sufficient sonotrode clearance all contribute to a repeatable production setup.
A properly designed fixture helps manufacturers establish a more consistent welding process and reduces unnecessary adjustment during production.
Looking for an ultrasonic welding fixture for your battery busbar application?
Contact Wuxi Qijiang Precision Machinery Co., Ltd. with your component drawings or samples. Our engineering team can evaluate the welding structure and discuss a suitable fixture configuration.